Intelligent Digital Peak Power Multi-Mode Flyback Controller

HY1601B

Application

Power Adapter for Printer / Motor Driver
Power Adapter for Audible Speaker
Notebook Adapter

DESCRIPTION

      HY1601 is an intelligent digital multi-mode Flyback controller. It can be chosen to support the power delivery that fully integrates the power path up to 100W of power with alternate modes. The peak power architecture supports a transient peak power delivery for maximum 64ms.

      HY1601 integrates rich protections and features such as line compensation, slope compensation, transformer short protection, output over-voltage protection, over-temperature protection, brown in and brown-out, sense resistor short protection. HY1601 series has 4 options: HY1601A(65/130kHz CV/Peak Power, on chip OTP), HY1601B(89/150kHz CV/Peak Power, on chip OTP), HY1601C(65/130kHz CV/Peak Power with external NTC), HY1601D(89/150kHz CV/Peak Power with external NTC).

HY1601 is available with the SOT23 package.

FEATURES

·  Intelligent digital Peak Power Multi-Mode Control

·  Peak Current Mode Control at Burst-Mode /PFM/DCM/CCM

·  Continuous-Conduction Mode (CCM) at Low Line(LL), QR at High Line(HL) to Balance the Switching Loss and the Conduction Loss

·  Switching Frequency at LL up to 130kHz at Peak Power Mode

·  Adaptive Peak Load Current Period up to 64mS   

·  Switching Frequency Dithering to Improve EMI   

·  Adaptive MOSFET Gate Drive to Balance Switching Loss and EMI

·  MOSFET Gate Voltage is Clamped at 12V

·  Rich Protection Features  

§  Output OVP with Latch

§  VCC OVP with Latch

§  Transformer Saturation Protection

§  Output Short Circuit Protection   

§  Current Sensor Resistor Short Protection

§  Output Open Loop Protection

·   Line Feed-forward Compensation

·   Brown-in and Brown-out

·   Power Consumption < 75mW

·  Low Start-up Current (<3µA)
1.png

HY1601 Version Table


Version

HY1601A

HY1601B

HY1601C

HY1601D

Feature

CV/Peak Power

CV/Peak Power

CV/Peak Power

CV/Peak Power

Operation Mode

No-Load: Burst

LL:  DCM/CCM

HL: QR

No-Load: Burst

LL:  DCM/CCM

HL: QR

No-Load: Burst

LL:  DCM/CCM

HL: QR

No-Load: Burst

LL:  DCM/CCM

HL: QR

Switching Frequency

LL: 65/130 kHz

HL: 65 kHz

LL: 89/150 kHz

HL: 89 kHz

LL: 65/130 kHz

HL: 65 kHz

LL: 89/150 kHz

HL: 89 kHz

VCC

POR: 16V

UVLO: 7.5V

POR: 16V

UVLO: 7.5V

POR: 16V

UVLO: 7.5V

POR: 16V

UVLO: 7.5V

Adaptive Driver (*)

12V

12V

12V

12V

Output Peak Current Period

64ms

64ms

 64ms

64ms

Line Voltage Sens

Yes

Yes

Yes

Yes

Brown-in/Out

Yes

Yes

Yes

Yes

Frequency Jittering

+/- 10%

+/- 10%

+/- 10%

+/- 10% 

Protection

Vout_OVP

1.5V(Latch)

1.5V(Latch)2.0V(Latch)2.0V(Latch)

Transformer Saturation Protection

YesYesYesYes

Open Loop Protection

YesYesYesYes

Current Sense Short Protection

YesYesYesYes

Thermal Shutdown (*)

Yes

On chip OTP

Yes

On chip OTP

Yes

On chip OTP & external NTC OTP

Yes

On chip OTP & external NTC OTP

VCC OVP

26V26V26V26V

*Patented Technology 


Title Last update Share Viewing times

Pin Configuration

  (TOP VIEW)

1.png
     SOT23-6

Functional Pin Definitions

No.

Name

Description

1

GND

Ground.

2

FB

Voltage loop feedback input. Connect an opto-coupler from the FB pin.

3

VMS

Auxiliary winding detection signal input. It detects the input voltage and output voltage information

4

CS

Current sensing input.

5

VCC

VCC is the supply of IC. The controller is enabled when VCC voltage reaches VCC_ON and disabled when VCC drops below VCC_UVLO.

6

OUT

Gate drive output and NTC detection input  

Do Not Sell My Personal Information │Privacy policy Cookie policy Terms of use Terms of sale