The ANX7100 is a gate pulse slicer (gate pulse modulator) solution optimized for thin-film transistor (TFT) liquid crystal displays (LCDs).
The gate pulse slicer is a flicker compensation circuit to reduce the coupling effect of gate lines; the gate-shaping timing is controlled by the timing-controller to modulate the Gate-On voltage, VGHM. It also can delay the Gate-On voltage during power-on to achieve a correct power-on sequence for gate driver ICs. Both the power-on delay time and the falling time of the Gate-On voltage are programmable by external capacitor and resistor. There are 2 mode of ANX7100 to control the Gate-On duration; one is depending on VFLK logic-high period from timing-controller, the other is depending on the charging time of external capacitance.
The ANX7100 is available in a SOP-8 green package.
l Flicker compensator
l Power-on sequence control
l Operation from 10V to 36 supply voltage
l Operation up to 200kHz switching frequency
l 2 modes of Gate-On duration control
l Thermal shutdown (optional)
l SOP-8 package
l RoHS compliant and 100% Lead(Pb)-Free/Green
SOP-8 pin CONFIGURATION