The positive charge-pump controller provides 2x output voltage. To minimize the inrush current a built-in soft start circuit sets the soft start period.
The ANX6501 is convinient to use and requires only 5 small and low-cost ceramic capacitors. It is availiable in the ultra slim XDFN-8L package which reduces board size and make the FPC or PCB layout design easier.
l 1.7V to 3.0V Input Supply
l Positive Output Voltage 2x Input Voltage
l Up to 90% Power Conversion Efficiency
l Up to 100mA Output Current when VIN = 1.8V
l Build-in Soft-Start to Reduce Inrush Current
l Cycle by Cycle Input Current Limit Protection
l Small 8-pin 2mm×2mm×0.35mm XDFN Package
l RoHS Compliant and Halogen Free
PIN CONFIGURATION
| 標題 | 最後更新 | 分享 | 觀看次數 |
|---|
ORDERING INFORMATION
| Part Number | Package |
|---|---|
ANX6501AAD | XDFN2x2 – 8L |
TYPICAL APPLICATION DIAGRAM
(1) High Output Current Requirement Application
Value | Description | Size | Part Number | MFR | |
C1,C4 | 2.2uF | Capacitor, Ceramic, X5R, 16V, ±10% | 0603 | C1608X5R1C225K | TDK |
C2,C3 | 2.2uF | Capacitor, Ceramic, X6S, 16V, ±10% | 0402 | GRM155C81C225KE11D | Murata |
版權所有©2020 華源智信半導體（深圳）有限公司│粵ICP備20068124號
