The ANX6652 is an integrated power supply solution with I2C interface which is optimized for small to medium size thin-film transistor liquid crystal displays (TFT-LCD). It operates with high conversion efficiency from light load to heavy load and is suitable for battery applications.
The synchronous boost converter provides the regulated supply voltage for the panel source driver ICs.The programmable switching frequency ranges from 600kHz to 1.2MHz.
The low dropout voltage regulator(LDO) supplies the regulated voltage for timing-controller(TCON) or driver ICs.
The integrated 8-bit Vcom califrator is typically used for LCD Vcom driving; and the device also provides another independent OPAMP and a built-in gate pulse modulator(GPM).
The supply monitor(voltage detector) generates a reset signal when the system is powered down.
The ANX6652 includes the protection fucnitons for all internal switches and function blocks to protect all converters against all the output fault conditions.
It is available in a thin 20-pin 4x4 mm WQFN green package with Halogen free and RoHS compliant.
l 2.5V to 6V Input Supply Voltage
l I2C Interface
l AVDD Current-mode Sync. Boost Regulator
- 4.5V to 11V Programmable Output
- 600kHz to 1.2MHz Programmable Switching Frequency
- Fast transient response to pulsed load
l Low Dropout Voltage Linear Regulator
- 1.2V to 2.8V Programmable Output
l Programmable 8-bit Vcom Buffer Output
l Integrated Operational Amplifier
- ±150mA Maximum Output Current
l Gate Pulse Modulation Function
l Programmable Voltage Detector
l Thermal Shutdown
l RoHS Compliant and Halogen Free
l Thin 4x4mm 20-lead WQFN Package
QFN-20 PIN CONFIGURATION
| 標題 | 最後更新 | 分享 | 觀看次數 |
|---|
ORDERING INFORMATION
| Part Number | Package |
|---|---|
ANX6652AAQ | WQFN-20L, 4x4 |
TYPICAL APPLICATION DIAGRAM
版權所有©2020 華源智信半導體（深圳）有限公司│粵ICP備20068124號
